Getting on the news

Posted: May 6, 2014 in Personal, Transport

Video: Vandals graffiti train at Granville, Seven News (5 May 2014)

This blog’s author was quoted on the news yesterday, both on Channel Seven’s 6PM bulletin and the Parramatta Sun newspaper. It came from a 4 minute video of 3 men vandalising a train between Harris Park and Granville Stations, taken and uploaded to YouTube on Saturday. A number of photos were also taken.

One of the three graffiti vandals tagging the side of a train. Click to enlarge. (Source: Author.)

One of the three graffiti vandals tagging the side of a train. Click to enlarge. (Source: Author.)

Other than posting a link of this video to social media, this blog’s author did not seek out any further media exposure and was instead contacted by the two aforementioned media organisations.

Video: Graffiti vandals tagging a train near Granville , Author (3 May 2014)

Despite this, it can be useful to know what to do when you see something happening and want to document it for the media. Victorian public transport advocate Daniel Bowen, who has done his fair share of passing on information to the media, wrote some useful tips. The key points are reproduced below.

Show the problem. Show the scale of the issue; some context. A crowded train doorway on its own isn’t a problem. The entire carriage being packed, and people giving up and waiting on the platform is a problem.

Make notes about what it is you’re showing, and post those (even if brief) with the material. Are we looking at a tram that’s packed because the three before it were cancelled (so the problem is service reliability) or it’s packed despite everything running smoothly (so the problem is service frequency and the number of trams)? Why is this significant? Is it part of a wider problem?

Don’t mislead. If you’re aiming to get a problem fixed, your photos and video are only part of the evidence — it may be what sparks further investigation, but fundamentally you’ll be wasting your time (and quite possibly set your cause back) if it turns out you implied something which didn’t really happen.

Don’t be creepy or irritate people — when I’m trying to film packed PT, I’m not trying to film individuals, I’m filming crowds. Occasionally I’ll get stares, and I’d be happy to explain what I was doing if ever asked, but do I think there’s a way to film in a crowd while not lingering on specific people, and not giving the impression of creepiness.

If possible, be prepared. Sometimes things happen spontaneously, and it might be a struggle to whip out your phone camera in time and snap a pic or shoot some video. Other things are regular events. For the summer timetable crowding, I knew it was happening every day, so took along a proper camera and positioned myself at the end of the carriage to be able to get good shots.

Be safe and considerate. Don’t do anything silly to get a good shot, and don’t get in the way.

For videos

Hold that shot. You’re aiming for footage in a news report, not a music video, so don’t wave the camera around too much. Hold it still and steady, and get shots of at least 5 seconds each, preferably a bit longer.

Vary the angles. For television footage, they’ll need to chop up your video so it works well for viewers. Be sure to provide a few different angles. For January’s crowded train footage I included a shot through the end-of-carriage door into the next carriage. It was a bit arty, but worked well — they used it — and helped show context as well — it wasn’t just my carriage that was sardine-like.

Video is, of course, better for TV, but photos also sometimes get a run on TV, and online and in newspapers. A mix may be good, if you can manage it!

Don’t talk over it. If you’re trying to be a reporter, rather than a witness (if you know what I mean) then don’t talk over the vision. The noise from the event itself may be more important than a commentary, which can be added later. That said, spontaneous commentary can work okay.

Finally… but critically…

Shoot video in landscape. It seems to be way too easy to forget that whether it’s on the TV news or Youtube, most video is better viewed landscape, not portrait. Turn your phone 90 degrees before you start shooting – it makes much better use of the camera’s resolution.

Where to take the footage?

All media outlets these days look for contributions, because good photos and video are invaluable. Contact the newsroom at your preferred outlet, explain what you filmed and why you think it’s important.

For a story to get a good run, it may be better to initially give it to only one outlet unless it’s utterly explosive (perhaps literally).

And be prepared to be interviewed/quoted, though depending what it is, they may be prepared to take it anonymously, or at least not identify who had the camera.

  1. Vic says:

    Rotten Scoundrels. Good work on catching them on film.

  2. MrV says:

    Surely a better response is to allow the doors to open and have a couple of age/size appropriate males deal with the situation and issue an appropriate on the spot beating.
    Of course all they’d need to do is grab the hoods of these cowards to reveal their face and it would be game over.

    Alternatively some way of delivering the 3000V overhead DC to these guys could also be investigated.
    Or if it is obvious the youths have tripped the signal for a graffiti operation, perhaps a proceedure to proceed ahead under caution to the next station would be appropriate? For the driver to just sit there is pathetic.

    Trapping people on trains like this is creating a situation of learned helplessness and these vandals know it and abuse it!

  3. michblogs says:

    Hey, that’s you on the TV. How cool is that ?

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s